UV printing deposits an image directly onto a prepared surface. Ultraviolet light cures the ink during the printing process, allowing fine detail, rich colour and controlled white layers on transparent glass.<\/p>\n<\/div><\/div><\/div>
For glass, the ink system, surface treatment and application matter as much as the printer. A production test helps confirm adhesion, colour and the desired level of transparency before a full run.<\/p>\n<\/div><\/div><\/div><\/div><\/div>
WHY CHOOSE UV GLASS PRINTING<\/p>\n
Detail, flexibility and a shorter production cycle.<\/h2>\n
A digital workflow can bring branded and decorative graphics to glass without the fixed artwork setup associated with some conventional methods.<\/p>\n<\/div><\/div><\/div><\/div><\/div>
\n
Crisp visual detail<\/h3>\n
Reproduce logos, patterns, photographs and fine lettering. White ink can help control opacity and improve colour visibility on clear glass.<\/p>\n<\/div>\n<\/div><\/div><\/div>
\n
Efficient workflow<\/h3>\n
The ink cures as it is printed. Digital files support prototypes, short runs and project variations, while overall lead time still depends on finishing and approvals.<\/p>\n<\/div>\n<\/div><\/div><\/div>
\n
Tailored appearance<\/h3>\n
Choose full colour, selective white, clear areas and layered effects to suit the panel, viewing direction and lighting conditions.<\/p>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div>
FIVE PRODUCTION STEPS<\/p>\n
How a glass print comes together.<\/h2>\n
Each project starts with the use of the panel and ends with an inspection against the approved sample.<\/p>\n<\/div><\/div><\/div><\/div><\/div>
01 \/ ARTWORK<\/p>\n
Choose and prepare the design.<\/h3>\n
Create artwork at the final panel dimensions with suitable image resolution. Decide whether the graphic will be viewed from the printed side or through the glass. Confirm mirrored artwork, white ink, clear areas and colour expectations in a proof.<\/p>\n<\/div><\/div><\/div>
02 \/ SURFACE<\/p>\n
Prepare the glass.<\/h3>\n
Check that the panel is suitable for the intended location and printing process. Remove dust, oils and fingerprints using a cleaner approved for the glass and ink system. Some systems call for a glass primer; others use a dedicated ink without one.<\/p>\n<\/div><\/div><\/div><\/div><\/div>
03 \/ SETUP<\/p>\n
Set up the printer.<\/h3>\n
Select a compatible glass ink system, secure the flat panel on the print bed and set the print profile. Check panel thickness, head clearance, resolution, colour mode and white ink layers before the production pass.<\/p>\n<\/div><\/div><\/div>
04 \/ PRINT & CURE<\/p>\n
Test, print and cure.<\/h3>\n
Run a test print to check registration, coverage, colour and transparency. Adjust the file or settings where needed. During production, the printer\u2019s UV lamps cure the ink in accordance with the selected ink and machine settings.<\/p>\n<\/div><\/div><\/div><\/div><\/div>
\n
05 \/ FINAL CHECK<\/p>\n
Inspect and finish the panel.<\/h3>\n
Compare the finished print with the approved proof for detail, uniform coverage, opacity and adhesion. Where the application calls for it, consider a compatible protective finish or layered texture. Confirm handling, installation and cleaning instructions before the panel is delivered. Names, location details and other personalised elements can be incorporated in the final artwork.<\/p>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div>
PUT THE DESIGN TO WORK<\/p>\n
![\"Glass](\"https:\/\/boranreklam.com\/wp-content\/uploads\/en\/2017\/07\/Glass-Office-Design-.jpg\" "\\"Glass")
<\/span><\/div><\/div><\/div><\/div><\/div>