Printing directly on glass can turn a panel into a branded or decorative feature. Yet the finished result depends on much more than the artwork: glass type, dimensions, installation, light transmission and cleaning all affect the production route.<\/p>\n<\/div><\/div><\/div>
A panel intended for an interior partition has different requirements from exterior glazing or a small display. Confirm the project\u2019s safety and building requirements with the glazing specialist before selecting the print method and finish.<\/p>\n<\/div><\/div><\/div><\/div><\/div>
01 \/ SUBSTRATE<\/p>\n
Understand the glass you will use.<\/h2>\n
Specify the panel before preparing the final artwork. Its construction and coating influence the print process and installation.<\/p>\n<\/div><\/div><\/div><\/div><\/div>
\n
Annealed glass<\/h3>\n
Common float glass may suit some decorative uses. Its breakage behaviour and any further processing need to be evaluated for the location.<\/p>\n<\/div>\n<\/div><\/div><\/div>
\n
Toughened glass<\/h3>\n
Used where the glazing design calls for its strength and safety characteristics. Confirm the processing order and print system with the glass supplier.<\/p>\n<\/div>\n<\/div><\/div><\/div>
\n
Laminated glass<\/h3>\n
Several layers create a different construction. The printed surface, interlayer, orientation and installation detail must be decided together.<\/p>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div>
02 \/ PRINT METHOD<\/p>\n
![\"Printed](\"https:\/\/boranreklam.com\/wp-content\/uploads\/en\/2017\/07\/Print-on-Glass.jpg\" "\\"Print")
<\/span><\/div><\/div><\/div><\/div><\/div>